Your CleverPoint 4 is charged and tested before shipping — so you can start using it straight away.
Charging the battery #
To optimize the use of your CleverPoint 4, we recommend that you fully charge it before making recordings.
To charge the battery, plug the USB charging cable into the USB-C port of the headset.
Then, connect the other end of the USB charging cable to a power outlet.
The length of time it takes to fully recharge your CleverPoint 4 depends on the remaining capacity of the battery. Charging can take several hours.
If you have any issues charging your CleverPoint 4, please contact the CleverPoint Support team.
Charging behaviour #
The color indication of the side LED illumination indicates the battery charge level.
Green color – full battery charge >70%
Orange color – medium battery level 35%-70%
Red color – battery level below 35%.
Attention! If the charge is less than 20%, the side LED illumination will flash red 3 times upon turning on, and the device will shut down.
Checking the Battery Level and Device Connection Type #
If the device is turned off and you need to check the battery level and the device’s connection mode, briefly press the device’s Power button:
• The color of the device’s button will indicate the mode of the last connection according to the Power button’s indication type.
• The color of the side LED indication will indicate the battery charge level according to the color indication of the side LED illumination.
• After 5 seconds of brief pressing, the device will turn off.
